MODEL 594 PHOENIX
Tentec revient plus fort que jamais

PRELIMINARY SPECIFICATION

SUBJECT TO CHANGE WITHOUT NOTICE

GENERAL:

GENERAL COVERAGE: 300 KHZ-55 MHz, Specifications guaranteed in Amateur bands.

SUPPLY VOLTAGE: 13.8V ± 15%

FREQUENCY ACCURACY: ± 5 Hz @25 C

FREQUENCY STABILITY: ± 0.5 PPM over operating temperature range

DIMENSIONS (HWD): 4.14 x 9.06 x TBD inch, 105 x 230 x TBD mm, (excluding connectors)

FRONT CONNECTORS: Headphones, Mic: 1/8^th inch stereo plug 2 x USB2

REAR CONNECTORS: RF: 2 x SO-239. Accessory Connector, Band Data Connector, Power Connector. HDMI connector, USB3 connector, Predistortion input

RECEIVER:

SINGLE ADC: Two receivers in same band (Main and Sub)

(with SECOND ADC option) Two receivers in any band

MDS (Preamp off / on): -117 dBm / -134 dBm, ± 3 dBm typical

ADC OVERLOAD POINT: +4 dBm without attenuation.

BLOCKING IMD (Preamp off/ on): 120 / 121 dBm typical

RECEIVE CURRENT: < 2A

TRANSMITTER:

POWER: 5-100W ± 1dB

DUTY CYCLE: Continuous SSB/CW, 50% AM, FM, PSK/digital

TX BW: 300 Hz-6KHz, adjustable

FM DEVIATION: ± 5KHz

HARMONIC & SPURIOUS EMISSION:

1-30 MHz: < -50 dBc @ 100W

30-55 MHz: -60 dB @ 5-100W, -43 dBc < 5W

THIRD ORDER IMD: -60 dB below PEP, minimum

ADAPTIVE PREDISTORTION: Internal, and sample port from external amplifier

TX / RX RECOVERY TIME: < 20 ms

RISE AND FALL TIME: 5 ms

CW OFFSET: adjustable

CW KEYER SPEED: 5-50 WPM, Adjustable weighting/

CW KEYER: Curtis Mode B, USB Keyboard

CW MEMORIES: 10

TRANSMIT CURRENT DRAIN: 20A Typical

ANTENNA TUNER:

TYPE: Reversible L network

MATCHING FREQUENCY RANGE: 160-10m, no 6m.

MATCHING RANGE 10:1 SWR typical

REMOTE CONTROL:

Full Remote Station Control using Client/ Server architecture.

Embedded web server with no external software ready to go out of the box.